This is an Apollo Command Module spacesuit suit hose connector used to connect to the CM bulkhead panel for suit oxygen and return. The serial number on it are: G14-824333 104-66 NC 06362 MAE2143
Apollo Spacesuit Hose Connector to CSM Read More »
Nearly all of the common souvenirs and trinkets sold to tourists at the Kennedy Space Center during the time of Apollo are, well, let’s just say not that interesting. The stuff just looks cheap (at least to me). This Project Apollo mug is different. It is shaped like the Apollo Command Module and has clean
Project Apollo mug Read More »
I had always wanted an interesting flown item from Apollo 11, the first lunar landing mission. This one inch square of Mylar encased in Lucite, would have been created by NASA as mementos for VIPs and people who worked on the mission.
Apollo 11 Mylar Command Module Thermal Coating in Lucite Read More »
AVCOAT 5026-39HCG HeatShield test block, measuring approximately 5 5/8" wide, 1 1/2" deep and 2 3/8" tall, manufactured in 1966 as a component of the Command Service Module (CSM) Thermal Protection System. Developed by AVCO Corporation, with integration by NAA (North American Aviation), the block is comprised of an extremely lightweight fiberglass honeycomb which is
Apollo Command Module Heat Shield Test Block Read More »
The bottom of this fascinating artifact reads: "This is a segment of the actual backing restraint material removed from mission commander James A Lovell’s spacecraft couch aboard the Apollo 13 command module ‘Odyssey’. This artifact symbolizes one of the greatest human dramas to ever unfold in space during the near catastrophic mission of Apollo 13,
Apollo 13 flown couch material Lucite intended for Apollo 13 movie VIPs Read More »
A Reaction Control System (RCS) Helium Check Valve assembly manufactured by Accessory Products Corporation (APCO) for the Apollo Command Module and Service Module (Service Propulsion System) Reaction Control System (RCS) Propellant Pressurization Section under NASA contract NAS9-150. Produced circa 1964, two check valve assemblies, one for oxidizer and one for fuel, permit helium flow to
Apollo CM Reaction Control System Helium Check Valve Read More »
This Environmental Control System valve was designed for the Apollo Block I CSM Left Hand Equipment Bay (LHEB) Panel 207 (ECS Girth Frame Shelf Controls). The valve was designed to be manually controlled by a T-handle tool. It would have been used either as a Glycol Reservoir Shutoff Valve, Glycol Reservoir Outlet Valve and Glycol
Apollo Command Module Environmental Control System Valve Shutoff Read More »
I suspect, but am not certain, that this valve would have been used in the Apollo Command Module drinking water supply system Contract: NAS 9-150 (Apollo CSM), Manufacturer: AIRESEARCH, Part no. 0094-0054 per 827310-2-1. NASA Part ID Number: ME 284-0150-0001, Date of Production: First Quarter 3Q 1964
Apollo Command Module Environmental Control System Valve Metering Globe Read More »
This valve would have been used in the Apollo Command Module drinking water supply system. Apollo Block 1 Panel 304. Contract: NAS 9-150 (Apollo CSM), Manufacturer: AIRESEARCH, NASA Part ID Number: ME 284-0154-0021, Date of Production: First Quarter 10/66
Apollo Command Module Environmental Control System Globe Valve Read More »
This interesting lucite was issued by the AC Electronics Division of General Motors, which developed the guidance systems of the Apollo CM, to commemorate the Apollo 8 flight around the moon. It reads December 21-27, 1968, Guidance and Navigation / AC Electronics Division / General Motors and has the Apollo 8 mission emblem.
Apollo 8 lucite issued by General Motors AC Electronics Read More »